Trailer Tech Pro – App Demo Support

  1. Allow app to Find Bluetooth Devices
  2. Allow app access to use the camera for recording
  3. Allow app access to use the microphone for recording
  4. Click green Connect Bluetooth button
  5. Turn on TrailerTechPro BLE Tester device
  6. Select TrailerTechPro under Available devices
  7. Notice bubble at the top left changes green
  8. Notice Current Amps starts reading out
  9. Notice Voltage Calibrates then displays output voltage
  10. Click all 4 trailer testing buttons at the bottom right
  11. Notice Amps increases with each button selected
  12. Notice Voltage drops slightly from the load
  13. Disable all 4 trailer testing buttons
  14. Notice Amps drops back down to about 0 Amps
  15. Optional Click Change iOS Album button
  16. Enter new Album name if wanted
  17. Click Start Recording, counting down to initialize camera
  18. Test all 4 trailer buttons again while recoding
  19. Notice lights on the TrailerTechPro turn on and off
  20. Click red Stop Recording button
  21. Click Save
  22. Allow TrailerTechPro access to Photo library to save video
  23. Notice location and album name where video saved
  24. Click orange camera button to disable camera preview
  25. Click Open Photos App
  26. Click most recent video to play
  27. Or Navigate to default Album named TrailerTechPro
  28. Go back to TrailerTechPro app
  29. Physically turn of switch on TrailerTechPro device
  30. Notice Disconnect message that display when device is too far away or loses power.
Privacy Policy – Trailer Tech Pro